Application instructions

Tribotechnical composition ArmActiv auto Engine

The volume of bottle is 90 ml, 190 ml.

Tribotechnical composition is designed to treat any type of engine (gasoline, diesel, gas) to protect against wear, reduce friction and optimize work processes.

Dosage
Engine oil volume, LDosage Gasoline engines

Up to 5 L
Diesel and gas engines

Up to 7 L
Gasoline engines

More than 5 L
Diesel and gas engines

More than 7 L
ml per volume 90 ml / 1 bottle 190 ml / 2 bottles
Overdose of composition up to 50% doesn’t make any harm to the engine.

Sequencing:

  1. Bring the engine to operating temperature (normal operation);
  2. Stop the engine;
  3. Shake a bottle of ArmActiv® auto Engine;
  4. Breaking the tamper control, open the cover and pour the composition into the oil filler neck of the engine;
  5. Close oil filler cap with stopper;
  6. Check the oil level (see the manual for the car), if it is insufficient, top up the oil level (see the car's manual);
  7. Start the engine and continue driving in normal mode, providing a run of at least 10-15 km.

The processing done is designed for a run of not less than 150 thousand km.

Compatible with any type of oil.

Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

Shelf life - 5 years.

Attention!

Do not apply for mechanical damage to components and mechanisms.

Tribotechnical composition ArmActiv Bearing

Package 70 gr, 380 gr.

Tribotechnical composition based on plastic grease. It is designed for processing rolling and sliding bearings to reduce friction, protect against wear and prolong their service.

Use as a normal grease.

Before starting using the composition, it is necessary to make sure that the part treated with the composition has no critical wear and mechanical damages (cracks, dents, potholes on the cage tracks, corrosion).

Sequencing:

  1. The design of the mechanism involves replacing the lubricant using a special syringe:
  • Fill the special syringe with ArmActiv® Bearing;
  • Connect the special syringe to the mechanism;
  • Extrude the grease until a fresh grease ArmActiv® Bearing arises from the leaks.
  • The design of the mechanism does not provide for special methods for replacing grease:
    • Disassemble the mechanism;
    • Remove old grease;
    • Wash and dry the mechanism (use special washing compounds);
    • Apply tribrotechnical grease ArmActiv® Bearing;
    • Assemble the mechanism.

    Use only in demountable structures.

    Shelf life - 5 years.

    Warning!
    Do not apply for mechanical damage to components and mechanisms

    Tribotechnical composition ArmActiv auto Gear A

    The volume of bottle is 50 ml.

    Tribotechnical composition is designed for treating automatic gearboxes of cars, as well as transmissions using ATF oils, to protect against wear, reduce friction and optimize work processes.

    Dosage
    Gear oil volume, LDosage Up to 7 More than 7
    Ml per volume 50 ml / 1 bottle 100 ml / 2 bottles
    Overdose of composition up to 50% doesn’t make any harm to the gear.

    Sequencing:

    1. Bring the automatic gear to operating temperature (normal operation);
    2. Stop the engine;
    3. Shake a bottle of ArmActiv® auto Gear A;
    4. Breaking the tamper control, open the cover and pour the composition into the oil filler hole of the automatic transmission. If access to the oil filler hole is difficult, use an oil syringe;
    5. Close the oil filler hole with a stopper;
    6. 6. Start the engine and continue driving in normal mode, providing a run of at least 10-15 km.

    The processing done is designed for a run of not less than 150 thousand km.

    Compatible with all types of ATF oils.

    Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

    Shelf life - 5 years.

    Attention!

    Do not apply for mechanical damage to components and mechanisms.

    Tribotechnical composition ArmActiv auto Gear

    The volume of bottle is 50 ml.

    Tribotechnical composition is designed to treat mechanical gearboxes to protect against wear, reduce friction and optimize work processes.

    Dosage
    Gear oil volume, LDosage Up to 2,5 More than 2,5
    Ml per volume 50 ml / 1 bottle 75 ml / 1,5 bottles
    Overdose of composition up to 50% doesn’t make any harm to the gear.

    Sequencing:

    1. Bring the mechanic gear to operating temperature (normal operation);
    2. Stop the engine;
    3. Shake a bottle of ArmActiv® auto Gear;
    4. Breaking the tamper control, open the cover and pour the composition into the oil filler hole of the mechanic transmission. If access to the oil filler hole is difficult, use an oil syringe;
    5. Close the oil filler hole with a stopper;
    6. Start the engine and continue driving in normal mode, providing a run of at least 10-15 km (7-10 miles).

    The processing done is designed for a run of not less than 150 thousand km (100 thousand miles).

    Compatible with all types of gear oils.

    Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

    Shelf life - 5 years.

    Attention!

    Do not apply for mechanical damage to components and mechanisms.

    Do not mix with ATF oils.

    Tribotechnical composition ArmActiv auto Trax

    The volume of bottle is 50 ml.

    Tribotechnical composition is designed to treat transmissions (reduction gearboxes, bridges) to protect against wear, reduce friction and optimize work processes.

    Dosage
    Gear oil volume, LDosage Up to 2,5 More than 2,5
    Ml per volume 50 ml / 1 bottle 75 ml / 1,5 bottles
    Overdose of composition up to 50% doesn’t make any harm to the transmission.

    Sequencing:

    1. Put the car on a lift or pit;
    2. Stop the engine;
    3. Shake the bottle with ArmActiv® auto Trax;
    4. Breaking the tamper control, open the cover and pour the composition into the oil filler opening of the unit. If access to the oil filler hole is difficult, use an oil syringe;
    5. Close the oil filler hole with a stopper;
    6. Start the engine and continue driving in normal mode, providing a run of at least 10-15 km.

    The processing done is designed for a run of not less than 150 thousand km.

    Compatible with all types of transmission oils.

    Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

    Shelf life - 5 years.

    Attention!

    Do not apply for mechanical damage to components and mechanisms.

    Do not mix with ATF oils.

    Tribotechnical composition ArmActiv Bulli Engine

    The volume of bottle is 190, 385 ml.

    Tribotechnical composition is designed to treat any type of engine (gasoline, diesel, gas) to protect against wear, reduce friction and optimize work processes.

    Dosage
    Engine volume, cm3Dosage Up to 5000 5000 - 7000 More than 7000
    Ml per volume 190 ml 385 ml 385 ml
    Overdose of composition up to 50% doesn’t make any harm to the engine.

    Sequencing:

    1. Bring the engine to operating temperature (normal operation);
    2. Stop the engine;
    3. Shake a bottle of ArmActiv® Bulli Engine;
    4. Breaking the tamper control, open the cover and pour the composition into the oil filler neck of the engine;
    5. Close oil filler cap with stopper;
    6. Check the oil level (see the manual for the car), if it is insufficient, top up the oil level (see the car's manual);
    7. Start the engine and continue working in normal mode, ensuring the work of not less than 5 hours.

    The processing is designed for a minimum of 3,000 hours of work.

    Compatible with any type of oil.

    Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

    Shelf life - 5 years.

    Attention!

    Do not apply for mechanical damage to components and mechanisms.

    Tribotechnical composition ArmActiv Bulli Gear A

    The volume of bottle is 90, 190 ml.

    Tribotechnical composition is designed for treating automatic gearboxes of cars, as well as transmissions using ATF oils, to protect against wear, reduce friction and optimize work processes.

    Dosage
    Engine oil volume, LDosage Up to 10 More than 10
    ml per volume 90 ml 190 ml
    Overdose of composition up to 50% doesn’t make any harm to the gear.

    Sequencing:

    1. Bring the automatic gear to operating temperature (normal operation);
    2. Stop the engine;
    3. Shake a bottle of ArmActiv® Bulli Gear A;
    4. Breaking the tamper control, open the cover and pour the composition into the oil filler hole of the automatic transmission. If access to the oil filler hole is difficult, use an oil syringe;
    5. Close the oil filler hole with a stopper;
    6. Start the engine and continue working in the normal mode, ensuring the work of not less than 5 hours.

    The processing is designed for a minimum of 3,000 hours of work.

    Compatible with all types of ATF oils.

    Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

    Shelf life - 5 years.

    Attention!

    Do not apply for mechanical damage to components and mechanisms.

    Tribotechnical composition ArmActiv Bulli Gear

    The volume of bottle is 90 ml, 190ml.

    Tribotechnical composition is designed to treat mechanical gearboxes to protect against wear, reduce friction and optimize work processes.

    Dosage
    10 ml of composition per 1 L of transmission oil.
    Overdose of composition up to 70% doesn’t make any harm to the gear.

    Sequencing:

    1. Bring the mechanic gear to operating temperature (normal operation);
    2. Stop the engine;
    3. Shake a bottle of ArmActiv® Bulli Gear;
    4. Breaking the tamper control, open the cover and pour the composition into the oil filler hole of the mechanic transmission. If access to the oil filler hole is difficult, use an oil syringe;
    5. Close the oil filler hole with a stopper;
    6. Start the engine and continue working in the normal mode, ensuring the work of not less than 5 hours.

    The processing is designed for a minimum of 3,000 hours of work.

    Compatible with all types of transmission oils.

    Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

    Shelf life - 5 years.

    Attention!

    Do not apply for mechanical damage to components and mechanisms.

    Tribotechnical composition ArmActiv Bulli Trax

    The volume of bottle is 90 ml, 190 ml.

    Tribotechnical composition is designed to treat transmissions (reduction gearboxes, bridges) to protect against wear, reduce friction and optimize work processes.

    Dosage
    Gear oil volume, LDosage Up to 2,5 More than 2,5
    ml per volume 90 ml 190 ml
    Overdose of composition up to 50% doesn’t make any harm to the transmission.

    Sequencing:

    1. Put the car on a lift or pit;
    2. Stop the engine;
    3. Shake the bottle with ArmActiv® Bulli Trax;
    4. Breaking the tamper control, open the cover and pour the composition into the oil filler opening of the unit. If access to the oil filler hole is difficult, use an oil syringe;
    5. Close the oil filler hole with a stopper;
    6. Start the engine and continue working in the normal mode, ensuring the work of not less than 5 hours.

    The processing is designed for a minimum of 3,000 hours of work.

    Compatible with all types of transmission oils.

    Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

    Shelf life - 5 years.

    Attention!

    Do not apply for mechanical damage to components and mechanisms.

    Do not mix with ATF oils.

    Tribotechnical composition ArmActiv Hydro

    The volume of bottle is 180 ml.

    Tribotechnical composition is designed to treat hydraulic systems (hydraulic motors, hydraulic cylinders, pumps) of cars to protect against wear, reduce friction and optimize work processes. Ideal for treating machinery that operates under conditions of severe dustiness.

    Dosage
    5 ml of composition per 1 L of hydraulic liquid.
    Overdose of composition up to 70% doesn’t make any harm.

    Sequencing:

    1. Stop the engine;
    2. Switch off the hydraulic system;
    3. Shake the bottle with ArmActiv® Hydro;
    4. Open the cover by breaking the opening control and pour the composition into the hydraulic fluid through the standard filler neck;
    5. Start the engine, turn on the hydraulic system and continue working in standby mode for at least 25 minutes.

    Periodicity of processing:

    The treatment should be performed at each scheduled replacement of the hydraulic fluid, but not more often than after 2000 hours.

    The produced treatment is designed for the production of not less than 2000 hours.

    Compatible with all types of hydraulic fluids.

    Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

    Shelf life - 5 years.

    Attention!

    Do not apply for mechanical damage to components and mechanisms.

    Tribotechnical composition ArmActiv pro Engine

    The volume of bottle is 190, 385 ml.

    Tribotechnical composition is designed to treat any type of engine (gasoline, diesel, gas) to protect against wear, reduce friction and optimize work processes.

    Dosage
    Engine oil volume, cm3Dosage 5000-9000 9000-12000 12000-16000
    ml per volume 190 ml 385 ml 385 ml
    Overdose of composition up to 50% doesn’t make any harm to the engine.

    Sequencing:

    1. Bring the engine to operating temperature (normal operation);
    2. Stop the engine;
    3. Shake a bottle of ArmActiv® auto Engine;
    4. Breaking the tamper control, open the cover and pour the composition into the oil filler neck of the engine;
    5. Close oil filler cap with stopper;
    6. Check the oil level (see the manual for the car), if it is insufficient, top up the oil level (see the car's manual);
    7. Start the engine and continue driving in normal mode, providing a run of at least 10-15 km.

    The processing done is designed for a run of not less than 150 thousand km.

    Compatible with any type of oil.

    Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

    Shelf life - 5 years.

    Attention!

    Do not apply for mechanical damage to components and mechanisms.

    Tribotechnical composition ArmActiv pro Gear A

    The volume of bottle is 90 ml, 190 ml.

    Tribotechnical composition is designed for treating automatic gearboxes of cars, as well as transmissions using ATF oils, to protect against wear, reduce friction and optimize work processes.

    Dosage
    Gear oil volume, LDosage Up to 10 More than 10
    ml per volume 90 ml  190 ml 
    Overdose of composition up to 50% doesn’t make any harm to the gear.

    Sequencing:

    1. Bring the automatic gear to operating temperature (normal operation);
    2. Stop the engine;
    3. Shake a bottle of ArmActiv® pro Gear A;
    4. Breaking the tamper control, open the cover and pour the composition into the oil filler hole of the automatic transmission. If access to the oil filler hole is difficult, use an oil syringe;
    5. Close the oil filler hole with a stopper;
    6. Start the engine and continue driving in normal mode, providing a run of at least 10-15 km (7-10 miles).

    The processing done is designed for a run of not less than 150 thousand km (100 thousand miles).

    Compatible with all types of ATF oils.

    Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

    Shelf life - 5 years.

    Attention!

    Do not apply for mechanical damage to components and mechanisms.

    Tribotechnical composition ArmActiv pro Gear

    The volume of bottle is 90, 190 ml.

    Tribotechnical composition is designed to treat mechanical gearboxes to protect against wear, reduce friction and optimize work processes.

    Dosage
    10 ml of composition per 1 L of transmission oil.
    Overdose of composition up to 70% doesn’t make any harm to the gear

    Sequencing:

    1. Bring the mechanic gear to operating temperature (normal operation);
    2. Stop the engine;
    3. Shake a bottle of ArmActiv® pro Gear;
    4. Breaking the tamper control, open the cover and pour the composition into the oil filler hole of the mechanic transmission. If access to the oil filler hole is difficult, use an oil syringe;
    5. Close the oil filler hole with a stopper;
    6. 6. Start the engine and continue driving in normal mode, providing a run of at least 10-15 km.

    The processing done is designed for a run of not less than 150 thousand km.

    Compatible with all types of gear oils.

    Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

    Shelf life - 5 years.

    Attention!

    Do not apply for mechanical damage to components and mechanisms.

    Tribotechnical composition ArmActiv pro Trax

    The volume of bottle is 90, 190 ml.

    Tribotechnical composition is designed to treat transmissions (reduction gearboxes, bridges) to protect against wear, reduce friction and optimize work processes.

    Dosage
    Gear oil volume, LDosage Up to 2,5 More than 2,5
    ml per volume 90 ml  190 ml
    Overdose of composition up to 50% doesn’t make any harm to the transmission.

    Sequencing:

    1. Put the car on a lift or pit;
    2. Stop the engine;
    3. Shake the bottle with ArmActiv® pro Trax;
    4. Breaking the tamper control, open the cover and pour the composition into the oil filler opening of the unit. If access to the oil filler hole is difficult, use an oil syringe;
    5. Close the oil filler hole with a stopper;
    6. Start the engine and continue driving in normal mode, providing a run of at least 10-15 km.

    The processing done is designed for a run of not less than 150 thousand km.

    Compatible with all types of transmission oils.

    Visible sediment is not an abrasive, but only a behavioral feature of the active component of the composition, which is eliminated by vigorously shaking the package before use.

    Shelf life - 5 years.

    Attention!

    Do not apply for mechanical damage to components and mechanisms.

    Do not mix with ATF oils.

    Tribotechnical composition ArmActiv® Мото 2

    Volume - 50 ml.

    Tribotechnical composition ArmActiv® Moto 2 is designed to treat any kinds of 2-stroke engines of motor vehicles to protect against wear, reduce friction and optimize working processes.

    Blends with any type of oil. It is added to the oil before mixing with fuel, or into fuel.

    Dosage
    50 ml of composition to 5 L of fuel.
    Overdose of composition on 50% is not dangerous for the nodes and mechanisms.

    Sequensing:

    1. Bring the engine to operating temperature (normal operation);
    2. Stop the engine;
    3. Shake a bottle of ArmActiv® Moto 2;
    4. Breaking the tamper control, open the cover and pour the contents into the oil filler neck of the engine. If the oil system is separate, pour the composition in the fuel tank;
    5. Close oil filler cap with stopper;
    6. Start the engine and continue driving in normal mode, providing a run of at least 5 km or 1 hour of operation.

    Provides reliable protection against wear on carbon nanoarmination technology.

    Properties:

    • Anti-scuffing (prevents seizing and scuffing of rubbing surfaces under high loads);
    • Antifriction (reduces friction loss);
    • Anti-wear (significantly reduces the wear of friction pairs).

    Effect:

    • Increase the engine life up to 5 times due to formation of a tribopolymer layer on the surface of friction pairs;
    • Reduce the fuel consumption up to 10%;
    • Complete absence of wear at the time of "cold start";
    • Significantly reduce vibration and hence noise;
    • Reduce smoke;
    • Optimize the gaps;
    • Remove deposits on the valves and in the combustion chamber.

    It is not an additive for oils. Oil serves only as a "transport system" for the delivery of the composition to the friction units. Does not change the viscosity of oils. It’s chemically neutral to them, blended with all types of motor oils.

    Attention!

    1. The engine must be in good condition.
    2. It is not allowed to pour the composition into the cold engine.

    Storage conditions:

    -200С - +700С (-40F - +1580F).

    Shelf life: 5 years from the date of production (indicated on the vial).

    Tribotechnical composition ArmActiv® Мото 4

    Volume - 50 ml.

    Tribotechnical composition ArmActiv Moto 4 is designed to treat any kinds of 4-stroke engines of motor vehicles to protect against wear, reduce friction and optimize working processes.

    Blends with any type of oil. It is added to the oil before mixing with fuel, or into fuel.

    Dosage
    50 ml of composition to the volume of oil up to 4 L.
    Overdose of composition on 70% is not dangerous for the nodes and mechanisms.

    Sequensing:

    1. Bring the engine to operating temperature (normal operation);
    2. Stop the engine;
    3. Shake a bottle of ArmActiv® Moto 2;
    4. Breaking the tamper control, open the cover and pour the contents into the oil filler neck of the engine.
    5. Close oil filler cap with stopper;
    6. Start the engine and continue driving in normal mode, providing a run of at least 5 km or 1 hour of operation.

    Provides reliable protection against wear on carbon nanoarmination technology.

    Properties:

    • Anti-scuffing (prevents seizing and scuffing of rubbing surfaces under high loads);
    • Antifriction (reduces friction loss);
    • Anti-wear (significantly reduces the wear of friction pairs).

    Effect:

    • Increase the engine life up to 5 times due to formation of a tribopolymer layer on the surface of friction pairs;
    • Reduce the fuel consumption up to 10%;
    • Complete absence of wear at the time of "cold start";
    • Significantly reduce vibration and hence noise;
    • Reduce smoke;
    • Optimize the gaps;
    • Remove deposits on the valves and in the combustion chamber.

    It is not an additive for oils. Oil serves only as a "transport system" for the delivery of the composition to the friction units. Does not change the viscosity of oils. It’s chemically neutral to them, blended with all types of motor oils.

    Attention!

    1. The engine must be in good condition.
    2. It is not allowed to pour the composition into the cold engine.

    Storage conditions:

    -200С - +700С.

    Shelf life: 5 years from the date of production (indicated on the vial).