ArmActiv Industry 190 ml
For use in machine tools, industrial equipment.
Tribotechical composition is designed for treating parts of machine tools and industrial equipment to protect against wear and reduce friction.
Blends with any type of oil and coolant.
For machine tool fleet
Treatment in the usual production cycle of drives, gears, sliding guides of any machine tools by introducing tribotecnical component "ArmActiv® Industry" into the lubricating oil of the equipment.
Treatment in the usual production cycle of bearing slides by introducing the tribotechical composition "ArmActiv® Industry" into the grease oil.
Processing of the cutting tool by adding tribotechnical composition "ArmActiv® Industry" in the coolant-cutting fluid in the production process.
The effect of complex treatment of the machine:
- Reduce the friction losses;
- Reduce the electricity consumption to 20%;
- Optimize bearing and sliding guides gaps;
- Reduce vibration;
- Improve surface quality of the part.
Treatment of cutting tools through coolant-cutting fluid leads to an increase in the life of the cutting tool and the quality of the surface of the part.
The use of tribotechnical composition "ArmActiv® Industry" allows avoiding equipment breakdown in case of emergency oil loss.
ArmActiv Energo for gas pumping stations, pumping stations
Tribotechnical composition is designed for treating gas pumping stations units and pumping equipment for special purposes to protect against wear, reduce friction and extend the timing of inter-service.
For diesel and gas piston generators
Application: in normal operation mode, the treatment of cylinder-piston group parts, crank mechanism and other friction parts of the diesel engine by introducing tribotechnical composition "ArmActiv® Energo" into the lubricating oil.
- Increase the resource of the parts of the cylinder-piston group and the crank mechanism up to 2 times;
- Reduce the fuel consumption up to 10%;
- Reduce the oil consumption by burning up to 3 times;
- Reduce the emission of harmful exhausts by CO, CH and NOx up to 20%;
- Reduce noise and vibration by 5-10 dB;
- Increase the life of the lubricating oil up to 2 times.
For piston, screw and turbochargers
In the mode of normal operation of friction parts of the compressor by introducing the tribotechnical composition "ArmActiv® Energo" into the lubricating oil.
- Increase the life of parts of the cylinder-piston group and the crank mechanism up to 2 times;
- Restore the compressor parameters to nominal pressure and capacity;
- Reduce the electricity consumption up to 15%;
- Reduce the oil consumption in compressible medium up to 3 times;
- Reduce noise and vibration up to 5 dB.
- Ability to work for some time with an emergency loss of lubrication.